Paintinging & Spraying | Residential
Surface Prep
Preparing surfaces for residential painting is a crucial step to ensure the longevity and quality of the finished paint job. Proper preparation can significantly enhance the appearance and durability of your paint job, making the final result look professional and neat. It also ensures that the paint adheres well to the surface, reducing the likelihood of peeling or flaking over time.
FAQs
Q: Is this drywall sander suitable for sanding ceilings?
Yes, InoKraft drywall sander is suitable for sanding ceilings. It features an extension pole, reaching up to 1.65m (5.4 feet), and a multi-angle rotating head. These features allow for easy ceiling sanding, often without the need for a ladder.
Q: Is this drywall sander lightweight and easy to maneuver?
InoKraft drywall sander weighs 3.5kg and requires some tools and techniques for easier handling. Our shoulder strap helps reduce weight during sanding, and the manual provides tips to assist you during sanding, making it very DIYer-friendly.
Q: Is this drywall sander's vacuum powerful enough?
Drywall sander with vacuum has dust absorption efficiency, suitable for small areas. For improved performance, connect it to a shop vacuum. We provide four adapter sizes, enhancing the seal and boosting efficiency to 95%.
Q: Does this drywall sander leave behind any swirl marks or scratches?
To minimize swirl marks or scratches:
1. Start with a higher grit sandpaper and a lower speed setting.
2. Gently touch the wall without pressing hard.
3. Move at a steady pace and avoid staying in one spot for too long.
Q: Is this drywall sander suitable for both drywall and wood sanding?
InoKraft drywall sander and its sandpaper are specifically designed for drywall sanding. For wood, we recommend using a specialized woodworking sander and accessories.
Related Videos
E-guides
User Manual
View & DownloadQuick Start-up
View & Download
FAQs
Q: Leak at joints?
If leak is between hopper and gun (or elbow hose),make sure that:
- Hopper pushed down to the bottom
- O-ring flat without any bends or deformations
- Clamp tightend around where the o-ring is located
If air leaks from air hose connector, wrap raw tapeover the air inlet.
Q: Gun does not spray?
Increase flow rate or air pressure, put finger on nozzle then pull the trigger to force clog out of gun and clean after each use to prevent clogs, or use thinner material.
